This thesis report describes the development of concepts regarding how weight can be reduced to the analytical instrument Biacore 4000. This thesis has resulted in five different concept proposals, all of which is solutions to reduce the instrument's weight.The thesis started with a pre-study where the instrument's structure and function were studied using both Solid Works, the opportunity to study the instrument in real life were also possible done. During this phase, a weight study was conducted as well, in which the instrument's weight distribution was studied and mapped.Following the initial phase, the work proceeded by developing concrete concepts to reduce the weight of the instrument where focus mainly was on the two cabinets. In addition, another two concepts were revealed, both with a more general approach.At the final phase of the thesis, the concepts were compiled and evaluated among themselves and the initial instrument.The thesis resulted in a study of the instrument's structure and weight distribution, with suggestions on how weight may be reduced for the instrument.The result factors such as materials, and manufacturing were aspects that were taken into consideration.At the final section of the report, suggestions for further work in which different aspects are discussed can be found..

In a society where adults set the conditions for children?s play and generate modern and at times technically advanced products, fundamental characteristics like simplicity, opportunities for motor skills training and learning tend to be neglected. Owing to this, the Linköping-based company Time In wants to introduce a new multifunctional product, which differs from other products in shape and function and lives up to the often overlooked, basic characteristics in a toy.With Time In as the assigner, the purpose of this master thesis has been to use simple means to produce a "learning by playing" concept. Since Time In sells toys and products suitable for children in nurseries and preschools, the development of the products has therefore included a study of nursery and preschool environments.The thesis has been carried out within the Product Design subject area at the Department of Management and Engineering at Linköping University. Concept development has been done in three phases: the Preparation phase, the Design phase and the Presentation phase.

The project is about making a Re-Design of the Swedish Socialistic Newspaper ?Dagens ETC?. The background to the project is my search for commitment when I work with a specific customer or project and how importantthat commitment are?The project was from the beginning split up to three different phases. The meaning of the first phase where to make a re-design mainly based on a interview with Johan Ehernberg, the chef editor on ETC.The second phase was a design totally made of my own idea and creative view as a Graphic Designer.I had in mind to make the third phase based on the result of the first two phases.During phase one and two I reconsidered and decided to skip the third step and put more effort in to the two first ones.

Palliative care is founded on a holistic attitude, with the goal to alleviate suffering when a cure is no longer possible. Palliative care affirms life and regards dying as a normal process, providing possibilities of a quality time for the patient and family. Studies show that an increasing number of people choose to live the final phase of their life in their own home. A requirement for end of life care is an effective team work, where the nurse is responsible for more advanced care, and the caregiver?s provides the immediate care.

I denna uppsats behandlas de grammatiska fenomenen complete phase och incomplete phase i det austronesiska språket rotumanska. Min avsikt med uppsatsen är att ta reda på varför complete phase respektive incomplete phase används i en viss syntaktisk eller morfologisk kontext. Jag har baserat denna studie endast på litteratur, främst från C.M Churchwards Rotuman Grammar and Dictionary..

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

The aim with this literature review is to describe the ensilage process in a bunker silo. The process from harvest and chopping to filling and unloading the silo is explained. The sealing of the bunker silo plays an important role for the final quality of the silage. This review covers some of the techniques used. There are many silage additives on the market, some of them are presented including how they act in the ensilage process.

AbstractThis study is about describing the pre- internationalization phase and to studycompanies that are in this phase. We are trying to capture characteristics of decisionmakersin the pre- internationalization phase, to then compare the theoretical materialwith empirical material from case companies. Then in the final stages of the thesis, wewant to account for if we managed to answer our research questions. In the method, wegive a description of the approach selected in conjunction with the study. The study isqualitative and we used both primary and secondary data, with a deductive approach.The theory chapter will consider the most relevant theories that are related to the topic,which is internationalization, pre-internationalization, international entrepreneurship,and the psychology behind personalities, attitudes, and how these can affect theorganization's strategic decisions.

AbstractThis study is about describing the pre- internationalization phase and to studycompanies that are in this phase. We are trying to capture characteristics of decisionmakersin the pre- internationalization phase, to then compare the theoretical materialwith empirical material from case companies. Then in the final stages of the thesis, wewant to account for if we managed to answer our research questions. In the method, wegive a description of the approach selected in conjunction with the study. The study isqualitative and we used both primary and secondary data, with a deductive approach.The theory chapter will consider the most relevant theories that are related to the topic,which is internationalization, pre-internationalization, international entrepreneurship,and the psychology behind personalities, attitudes, and how these can affect theorganization's strategic decisions.

The aim of this study was to investigate the intraoperative surgical stress response in dogs undergoing ovariohysterectomy and to compare acepromazine and medetomidine as premedications. 15 dogs diagnosed with pyometra were used in this study. Blood pressure and heart rate were used as parameters to measure surgical stress response. The surgery was divided into four phases. Phase 0 was the period 10 minutes before the skin incision, phase 1 was skin incision and opening of abdomen, phase 2 was manipulation of uterine horns, ligation and transection of mesovarium and phase 3 was ligation of cervix, removal of organs and closing the abdomen. The results showed that phase 2 was the most intense phase of surgical stress, regardless of which premedication the dogs received. When acepromazine and medetomidine were compared the results showed that within phase 3, all dogs that were given medetomidine had higher blood pressure compared to dogs that were given acepromazine. The dogs that were given acepromazine had higher heart rate than the dogs that were given medetomidine in phase 0, phase 2 and phase 3. .

This thesis was performed at Indusec ABin Stockholm. Indusec AB is a companythat develops security solutions.Together with the Police of Sweden theyhave gotten the assignment to develop anapplication based on one of theiralready existing product Inferno soundbarrier. This application is supposed tobe mounted on a ballistic shield thatthe police use, the application consistsof a speaker box (the sound barrier) anda trigger with wire. The trigger withwire is the part that will be addressedin this thesis. The application willthen be used as a tool to surprise atarget at various skirmishes.The project consists of three majorphases, pre-study, concept generationand modeling.

The final stage of a designers work is always a bit tricky. Design is an abstract phenomenon and no one can tell when a design is really finished. The design process that designers work within has been thoroughly studied but cannot be truly mapped with strict constraints which the designer can follow to succeed. Therefore, in this paper we take a look at the final stage in the design process. The main goal is to get more knowledge and highlight key factors about what designers face when they are about finish their design or what forces them to leave a project that can stay in development for eternity.

This diploma work project is a product development project which purpose is to redesign a braking system for a walking frame. The system that was developed diverges the force from the user to braking power, and includes a service brake as well as a parking brake. The most important components of the system are a grip handle on where the user holds on to and a braking handle on which the user operates the brake from. The system also includes a power transmission component, braking package and other mechanical components. All of the components wasn?t developed in this project, several off them has been reused from the existing system.This product has been developed to meet the requirements and standards presented from the principal, Ahlberg Leber.

Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.

Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.